Introduction
Construction is the life cycle phase where climate resilience is physically realised in port infrastructure. It is also the phase where resilience is most vulnerable to erosion, as it passes through many hand-offs between designers, contractors, suppliers, and owners.
Resilience Objectives
The overarching resilience objective of the Construction phase is to implement pre-defined technical climate-resilience measures in construction.
- Embed and retain climate resilience in constructing the transport asset. This involves ensuring that climate resilience is not eroded through cost pressures or communication failures, and adapting the design where needed to comply with cost or construction method limitations.
- Account for climate resilience in the construction process itself. This involves mitigating climate risks associated with construction and its impact on workforce, construction materials, and construction means and methods.
Construction: a high-risk moment in the infrastructure life cycle for resilience erosion
Realise climate resilience through construction, or lose it. Design and procurement create the specifications for climate resilience in transport infrastructure; yet Construction is the phase where they are either followed through or eroded through cost pressures, contractor substitutions, or communication failures between designers and contractors. Hand-offs between designers, contractors, sub-contractors, material suppliers, and asset owners during construction create multiple points where resilience can be traded off against cost or schedule[1]. Consider that constructing based on climate-resilience standards is likely to impact construction costs, with some sources indicating increases of around 5%[2]
Climate-proof the construction process itself. Construction sites for port and coastal transport infrastructure are directly exposed to the hazards the finished asset is designed to withstand. Construction workers are among the most climate exposed globally, with an estimated 19% of global working hours of construction workers lost to heat stress by 2030, presenting a particular risk for tropical and sub-tropical regions where coastal infrastructure is still to be built[3][4]. Construction hence benefits from being resilient in order to increase safety and workforce productivity and speed up project delivery, involving coordination efforts across the multi-modal transport ecosystem as climate events simultaneously affect the hinterland corridor under construction where workforce, supply chains, and contractors are shared within the ecosystem[5].
Note: when consulting this resource, it is important to recognise that the infrastructure life cycle is not always linear—the sequence or depth of actions can differ between projects and/or sectors.
Share this
Lead Practitioners
Designers
Designers provide oversight during the Construction phase and work closely with contractors to review and approve drawings, construction sequencing, and proposed changes to technical details and specifications. They play an important secondary role in ensuring a high-quality result with intended resilience value maintained at completion of construction.
Contractors
Contractors are responsible for physical construction and the quality of ports and connected transport infrastructure. They ensure that port infrastructure is built according to pre-determined technical specifications. Contractors can be large-scale national or international firms, and for ports, are specialist marine construction firms alongside road and rail contractors, and local, small-scale builders.
Owners and Operators
Owners and operators provide oversight to contractors as clients. They are responsible for approving changes to technical specifications where needed to comply with cost or construction method limitations. It is important for them to understand and value the ways in which climate resilience has been embedded in the project at earlier stages of the life cycle to ensure that climate resilience considerations are translated into the physical port infrastructure.
Key resources
The following resources have been identified as most relevant for practitioners working in the Construction phase of climate-resilient infrastructure.
Guidance UNEP
A Practical Guide to Climate-Resilient Buildings & Communities (2021)
This guide provides an overview of fundamental types of resilience interventions at the building scale with specific approaches for building envelope, roof, structure, orientation, and materials. Although tailored toward a developing country context, the majority of techniques can be upscaled and applied to any context.[6]
Guidance European Commission
Technical guidance on the climate proofing of infrastructure in the period 2021–2027 (2021)
This guidance integrates climate proofing with project cycle management, environmental impact assessments (EIA), and strategic environmental assessments (SEA) processes. It serves as a mandatory compliance framework for any infrastructure project seeking EU funding (InvestEU, CEF, ERDF, Cohesion Fund).[7]
Guidance ICSI
Port Decision-Makers’ Guide to Climate Risk Assessments
This guide bridges the gap between risk assessment and construction specification, offering port-specific resilience options (Table 6.1) including heat-resistant material requirements and digital infrastructure adaptation measures (Box 2.2), making it an actionable port resource for practitioners defining Quality Control and Quality Assurance (QC/QA) requirements.[8]
Guidance Schuldt et al.
Weather-Related Construction Delays in a Changing Climate: A Systematic State-of-the-Art Review (2021)
This report synthesises findings from 3,200+ construction studies, identifying extreme temperatures, precipitation, and high winds as the primary weather drivers of schedule delays, workforce productivity loss, and materials and equipment damage on construction sites. It provides the empirical foundation to justify climate risk preparedness in construction planning.[9]
Tool GFDRR
Building Regulation for Resilience
This tool promotes the enhancement of resilient, green, and inclusive built environments. It provides tools to support governments in assessing regulatory standards for construction and to identify gaps and opportunities for implementing climate resilience.[10]
Theme 1: Protect Resilience in what is being built
This theme addresses the challenge of ensuring that climate-resilience specifications established in the Design and Procurement phases are faithfully implemented during construction. It covers governance arrangements between designers and contractors, the use of modern construction methods and digital technologies, and quality control mechanisms that lock in resilience requirements throughout the building process.
7.1.1 Protect resilience design intent in construction through coordinated governance, collaboration between designers and contractors, and climate-resilient quality control
Lead practitioners: owners & operators
Supporting practitioners: contractors, designers
Objectives
The objective of this action is to establish collaboration modes between contractors and designers. This involves establishing mechanisms that ensure continuous communication between contractors and designers, as well as Multi-modal network optimization & interdependenciesstakeholders across the multi-modal transport network, so that resilience measures embedded during the Design phase are followed through as intended.
A further objective is to define quality controls to ensure the implementation of pre-defined resilience requirements. This involves leveraging quality control procedures to ensure compliance with pre-determined resilience requirements and construction codes.
Good Practices
Contractors and designers can consider the following good practices:
- Asset owner involvement in contractor-designer communications. Asset owners can be made aware of the resilience measures defined at earlier life cycle stages and implemented in construction[11]. Information on built climate-resilience measures can be cascaded into later life cycle stages, with the asset owner as the central link across all life cycle stages.
- Cascade of resilience requirements to sub-contractors. Erosion risks related to complex contractor–sub-contractor setups can be addressed by ensuring that resilience requirements are also communicated to sub-contractors[11]. Where port or terminal workers and operational staff will eventually operate the asset, involve their representatives early to flag construction or safety concerns relevant to the workforce[8].
- Digital technologies for communication. Digital technologies such as BIM can enhance communication between designers and contractors[12]. The benefits of visual digital tools in traditional Request for Information (RFI) procedures, such as real-time notifications of changes and collaborative pinpointing of areas of climate-resilient vulnerability can be considered.
Process, Tools & Guidance
Establish governance to structure designer–contractor communication
Involve contractors already during the Design phase through Early Contractor Involvement (ECI) to improve drawing quality, material supply, and information flow, leading to more integrated designbuild solutions. Build on resilience specifications from the design phase to inform climate-resilient construction, such as material selection or [13]robustness considerations defined in action 5.3.1. Leverage formal RFI procedures to seek clarification from a designer on why particular materials or methods have been selected, to counteract the erosion of planned resilience measures[14].
Give the asset owner a standing place in these communications alongside the designer and contractor, for example a named point of contact and a role in the RFI and design-change process, keeping them aware of the resilience measures defined earlier and how they are implemented, and channelling records of the resilience built into the asset through them.
Extend these channels to the sub-contractors, workers, and operational staff involved in delivery, so requirements are not lost where the work is carried out and those on the ground can raise construction or safety concerns early.
Relevant tools and guidelines:
- ISO 19650 – guidance on the implementation of BIM in projects, which can be leveraged to enrich traditional RFI procedures[15]
Integrate climate-resilience criteria into quality control procedures
Tailor QC/QA documentation and procedures to account for climate-resilience specifications. Leverage existing checklist tools or adapt them to assess the quality of construction as well as the climate risks within the construction process[16].
- Relevant tools and guidelines:
- A Practical Guide to Climate-Resilient Buildings & Communities (UNEP, 2021) – Chapter 6.1 includes a high-level checklist [17]
- Technical guidance on the climate proofing of infrastructure in the period 2021–2027 (European Commission, 2021) – Annex D.6 Table 14 [18]
7.1.2 Leverage Modern Methods of Construction (MMCs) and digital technologies to deliver resilient ports and connected transport infrastructure
Lead practitioners: contractors
Supporting practitioners: designers, owners & operators
Objectives
The objective of this action is to evaluate the feasibility of MMCs for the port infrastructure project. This involves considering whether innovative building techniques that shift processes from on-site construction to factory manufacture and digital design are feasible for the specific project, enabling more rapid reconstruction in the event of climate-induced damages.
A further objective is to lay the ground for climate-resilient decision-making in O&M. This involves installing the digital technologies needed for climate-risk monitoring during the O&M phase of the port infrastructure during construction.
Good Practices
Contractors can consider the following good practices:
- Anticipation of O&M requirements. The needs of future life cycle steps such as O&M can be considered during construction to ensure that the prerequisites for climate resilience at those stages are installed. Future re-construction needs due to failure or climate-induced damages can be accounted for during construction.
- Risk exposure reduced through digital technologies. The amount of on-site construction work can be alleviated by implementing MMCs such as modular integrated construction (MiC) or technologies such as BIM. Efficiency can be increased, thereby reducing the impact of extreme weather disruptions on project scheduling and productivity through reduced exposure[19].
- Adoption barriers for digital technologies. Adoption barriers can arise, such as the absence of enabling legislation, lack of data standards, interoperability challenges, and legal/contractual clauses that restrict data sharing. Refer to action 7.3.1 on how to address such regulatory challenges by leveraging industry influence[20].
Process, Tools & Guidance
Assess where and if principles of MMC could be applied
Evaluate whether modular and easily replicable designs are feasible for the project, weighing benefits such as ease of disassembly and reuse as well as rapid re-construction against major resilience disadvantages such as lower robustness and limited replicability of large transport port assets. Collaborate with the designer to assess the limitations of MMC and its appropriate usages.
Resources with further information on MMC:
- Modular Construction: From projects to products (McKinsey)[21]
- Modular Building Institute [22]
- Introduction to prefabrication, Autodesk University[23]
- Inside the Centre of Excellence for Modern Construction, Laing O’Rourke[24]
Install digital technologies needed for decision-making in O&M phase
Draw on the O&M requirements shaped in design (action 5.3.3) to install the relevant monitoring devices needed for O&M during construction, such as sensors, flowmeters, or early warning sensors. Consider resilience-proofing digital O&M port infrastructure by implementing redundant systems with geographically separate backup data centres, as well as using waterproofed equipment[8]. Collect real-time data such as ground conditions and trial-hole data during construction, feeding them into digital models.
Theme 2: Keep the construction process resilient
This theme focuses on managing climate-related risks that arise during the construction process itself—from extreme weather events affecting scheduling and workforce safety to disruptions in the supply of construction materials. It covers preparedness planning, workforce training, and supply chain diversification as complementary lines of defence.
7.2.1 Integrate climate hazard preparedness into construction and workforce planning
Lead practitioners: contractors
Supporting practitioners: owners & operators, designers
Objectives
The objective of this action is to consider potential extreme weather conditions in the construction plan. This involves preparing for climate hazards within the timescale of a construction project to manage construction with minimal disruptions and high safety[19]. Furthermore, it is valuable to prepare the construction workforce for climate disasters by building capacity among construction workers to deal with climate change impacts such as extreme temperatures or climate disasters.
Good Practices
Contractors can consider the following good practices:
- Climate-resilience capacity among local contractors. Construction safety, quality, and longevity can be improved by building climate resilience capacity among local contractors, particularly in low- to middle-income countries that are increasingly and severely impacted by climate change. The existing resilience expertise of international contractors can be leveraged, particularly in contexts where they lead the construction of transport infrastructure in less-mature countries to improve worker safety[25].
- Gender-specific climate vulnerabilities. Gender-specific vulnerabilities can be considered in climate disaster preparedness and workforce training[11].
- Shift focus from ‘hard’ to ‘soft’ adaptation measures. Focus can be broadened from hard (structural) resilience measures only to also develop ‘soft’ adaptation responses such as the development of emergency plans during the Construction phase. Multi-modal network optimization & interdependenciesThe gap for integrated climate-resilient emergency planning across ports and connected transport infrastructure construction sites can be acknowledged and mitigated [26][25].
- Synchronised scheduling across the multi-modal network. Multi-modal network optimization & interdependenciesInterdependencies with other projects across the multi-modal transport network (including passenger ferry, rail, and bus services using port-adjacent infrastructure) can be considered to avoid disturbances of services during construction, scheduling accordingly.
Process, Tools & Guidance
Integrate weather data into construction planning
Gather and understand data on the local climate system and weather to build awareness of site-specific climate risks and their impacts, such as unsafe conditions for workforce, delayed schedules, increased costs[27][28]. As part of this, gather data on how these hazards affect the workforce, including how exposure and impacts differ across groups, so that vulnerable groups are identified rather than assuming a uniform impact.
Incorporate insights on weather patterns into construction planning and scheduling. Draw on historical and projected climate data to account for probabilistic weather windows in construction scheduling, thereby reducing delays and cost overruns[19]. Integrate flexibility into scheduling to mitigate construction delays due to extreme weather events or other climate-related hazards.
Relevant tools and guidelines:
- Weather Services for Building Project Managers (Met Office) – a service used for the Forth Road Bridge Constructors (FCBC), where wind and rainfall analysis was used in the pre-construction phase and weather-dependent construction tasks were planned up to 14 days ahead to influence the hiring of plant and equipment[29]
Increase workforce safety through climate-disaster training
Account for climate change hazards as major drivers for reduced workforce productivity[19]. Site-dependent estimates for the impact of extreme heat suggest that productivity could drop by up to 10% on days with temperatures above 35°C[30]. Extreme weather events such as precipitation or high wind speeds also materially increase the risk of accidental injuries. Therefore, it is important to train the construction workforce for climate impacts on-site through scenario training. Implement heat protection measures for extreme heat days to improve workforce safety, such as shifting working hours away from the hottest times of the day or creating more shade to reduce sun exposure. Tailor the training and protection measures to the needs of vulnerable groups.
Relevant tools and guidelines:
- Weather-Related Construction Delays in a Changing Climate: A Systematic State-of-the-Art Review (Schuldt et al., 2021) – provides mitigation strategies such as work-rest cycles, weather-appropriate protective gear, etc.
Establish emergency plans for climate-related disasters
Establish emergency plans accounting for climate-related disasters, defining roles, site-safety and shutdown procedures, and how work resumes afterwards. Coordinate them across the multi-modal network and test them through joint emergency exercises[31]. Port and terminal workers who will operate the facility after construction are also exposed to climate hazards during any construction or maintenance activities they perform on-site; their safety protocols and capacity can be included in emergency planning from the outset, accounting for how hazards affect vulnerable groups differently so that emergency measures work for the whole workforce.
Relevant tools and guidelines:
- Business Continuity Management Systems (ISO 22301)[32]
- Climate Resilient PPP Toolkit (IDB, 2020)[33] –Tool 3.4 (emergency preparedness language)
Case Study Sanur Port in Bali, exposed to Indian Ocean swell, identified tidal wave risk as the single most dominant delay risk for its construction works. To mitigate this during construction, a structured risk management approach was adopted by prioritising wave conditions as the primary construction risk. Construction scheduling was restructured to determine construction methods according to tidal wave conditions, optimising work when wave conditions were normal or at low tide according to wave forecast data. Equipment selection and safety protocols were adapted to wave conditions, and work areas were equipped with safety signs and lifeboats. Workforce requirements were tightened to ensure that only qualified personnel were deployed under exposed conditions. The structured approach of risk prioritisation, followed by wave forecasting and adaptive scheduling, enabled the project team to identify and respond to the dominant hazard systematically rather than reactively. This provides a replicable framework for port construction in tropical coastal and small island developing state (SIDS) environments. Source: Juliastuti et al. (2023) – Risk Mitigation on Infrastructure Port Project Construction (Case Study: Sanur Port Project, Bali, Indonesia)[34] CloseMitigation of wave risk during construction at Sanur Port, Indonesia

Lead practitioners: contractors
Supporting practitioners: owners & operators
Objectives
The objective of this action is to reduce construction supply chain vulnerability through diversification. This involves understanding climate risk impacts on construction supply chains and building resilience through diversification and redundancy.
A further objective is to integrate circularity principles into the supply chain. This involves reducing primary material demand and dependency by integrating circular economy principles into the construction supply chain.
Good Practices
Contractors can consider the following good practices:
- Prioritisation of SMEs and local suppliers. SMEs and local suppliers can be prioritised for supply chain resilience where possible to reduce emissions as well as logistics frictions[35]. Climate-resilient supply chains are also important at later life cycle stages, when reconstruction needs arise after disasters.
- Transparency through digital tools. Emerging digital tools can improve transparency across the construction supply chain, helping to trace materials, manage risk, and support re-use of critical materials[36].
- Pooled resources across the port ecosystem. Multi-modal network optimization & interdependenciesThe interconnectivity of the port ecosystem with its connected land transport infrastructure can be utilised to harness synergies, delivering efficiency and effectiveness gains through pooled construction resources across both the ecosystem and the project pipeline.
Process, Tools & Guidance
Integrate climate resilience as criteria in supplier selection
Refer to procurement (see action 6.2.3).
Map suppliers’ locations and lead times on materials
Start by pooling supplier information across the port ecosystem and its connected transport projects into a shared supplier base, rather than each project building its own. Map vendors’ and suppliers’ geographic locations, keeping track of climate events happening in various parts of the world and their impacts on lead times and costs.
Relevant tools and guidelines:
- Climate-ready Supply Chain (TT Club, Haskoning, ICHCA, 2025)
Adopt digital technologies[37]
One emerging tool that can be used is the digital product passports (DPPs), which records a material’s origin, composition, and characteristics, attached to the material and updated as it moves through the chain, so that what is being built into the asset can be verified[36]. Apply DPPs first to critical or high-risk materials, and use the data to improve transparency over what has been supplied, to check that resilience specifications are actually met. Realising this depends on shared data standards and interoperability across suppliers, so agree the format and what must be recorded early, and build on existing industry schemes where they exist.
Relevant tools and guidelines:
- Construction and Demolition Waste Management Protocol (European Commission, 2024)[36]
Diversify supply chains to improve climate resilience
Build on the understanding of suppliers’ locations and climate risk exposure to identify supply chain vulnerabilities. Address the identified vulnerabilities by diversifying the supply chain and increasing redundancy, thereby building greater resilience. Draw on the pooled supplier base across the port ecosystem to widen the range of alternative and backup suppliers available. Where the mapping shows exposure to distant or vulnerable sources, prioritise local SME suppliers that can meet requirements, reducing emissions and logistics friction.
Consider that supply chain resilience has the potential to significantly improve project delivery time and reduce project cost. Research in the South African market, for instance, shows that building resilient supply chains has the potential to improve project delivery time by up to 30%[38] and reduce project cost from 15% to 20%.
Integrate circular economy principles into supply chain management to secure access to critical materials through re-use or high-quality recycling sources.[39][36]
Relevant tools and guidelines:
- The Mitigation of Risk in Resilient Supply Chains (OECD, 2018)[40]
- Completing the Picture: How the Circular Economy Tackles Climate Change (Ellen MacArthur Foundation, 2021)[41]
Theme 3: Strengthen the wider ecosystem for the future
This theme focuses on how the construction phase can contribute to broader systemic change, both through industry advocacy to embed resilience into codes and standards and through meaningful engagement with local communities that generates lasting socioeconomic co-benefits alongside physical resilience outcomes.
7.3.1 Embed climate-resilience requirements for materials, technologies, and systems into construction codes and industry standards
Lead practitioners: contractors
Supporting practitioners: governments
Objectives
The objective of this action is to embed climate resilience into construction codes, driving systemic improvement in construction standards, codes, and practices toward greater climate resilience and sustainability through collective industry advocacy. This matters because construction codes play a central role for other life cycle steps, such as design, which build on them as a baseline.
Good Practices
Contractors and governments can consider the following good practices:
- Workforce-led platforms. Councils or unions, which have historically lobbied for improved working conditions and labour matters, can be involved in driving climate-resilience integration into construction codes and standards.
- Use of advanced construction codes. More-advanced international construction codes and regulatory frameworks as a baseline for less-mature regulatory contexts. Build capacity to develop and enforce resilient construction standards within governments, particularly in regions where climate-resilience considerations in construction codes are less mature[42].
Process, Tools & Guidance
Shape a shared voice across the construction industry
Establish councils or industry organisations, if they do not yet exist, as a forum to raise awareness on climate resilience. Convene contractors within such forums to align on values and objectives, and carry them into the development of construction codes and standards.
Review existing construction codes to identify resilience gaps
Review existing standards and identify critical gaps that hinder resilience mainstreaming in the construction phase[43][20].
Relevant tools and guidelines:
- Strength, resilience, sustainability (Canadian Construction Association, 2021) – includes recommendations on calls to action for governments and other key stakeholders to promote climate resilience in built environments[44]
- The Global Status Report for Buildings and Construction (Global Alliance for Buildings and Construction, 2026) – annual publication to monitor global progress on climate mitigation and adaptation efforts within the buildings and construction sector[45]
- Building Regulatory Capacity Assessment (BRCA) (GFDRR) – tool for a comprehensive review of the building regulatory frameworks and implementation capacity [46]
- Building Code Checklists (GFDRR) – tools to conduct an in-depth technical review of building code contents, focusing on resilience, among others[47]
- Building Regulation for Resilience (GFDRR, 2025)[42]
- Canadian Construction Association (CCA, 2021)[48]
Embed climate resilience into construction codes
Engage with standard setters through industry organisations to inform their decision-making on how to tackle climate change in the construction industry. Incorporate best practices into updated standards and regulations as materials and approaches are tested and de-risked.
Case Study The Building Materials & Technology Promotion Council (BMTPC) was established by the Government of India in 1990 and performs a range of functions to bridge the gap between innovative materials and mainstream construction practice. These include assisting in capacity building and skill development through training of village artisans and craftsmen, evaluating and standardising innovative building materials and construction technologies through a Performance Appraisal Certification Scheme, and persuading central and state government agencies, housing development and construction organisations, and private sector actors to apply cost-effective and energy-efficient building technologies. The BMTPC has collaborated with the Bureau of Indian Standards (BIS) in the formulation of standards for cost-effective technologies such as fly-ash bricks, reinforced cement concrete (RCC) planks and joists, and bamboo mat corrugated roofing sheets. It has also collaborated with international organisations including the United Nations Development Programme (UNDP) to create a handbook for Disaster Risk Reduction, placing emphasis on climate change adaptation, delivered capacity building, and training programmes for construction professionals and the workforce. Source: UNDP, 2016. Disaster Risk Reduction: A Handbook for Urban Managers[49] CloseBuilding Materials & Technology Promotion Council, India

7.3.2 Use local sourcing and labour where possible in ports and connected transport infrastructure construction, generating socioeconomic co-benefits
Lead practitioners: owners
Supporting practitioners: contractors
Objectives
The objective of this action is to account for local communities’ needs in construction. This involves ensuring that transport infrastructure is built in a resilient and sustainable way, accounting for local needs by involving community stakeholders meaningfully in planning, design, and construction. This includes users of port-connected services (such as ferry passengers and commuters) who may be directly affected by construction disruptions. Note that, currently, inclusive governance and stakeholder engagement in transport infrastructure construction is rated “Low maturity” globally and thus benefits from additional attention[20]. A further objective is to create socioeconomic co-benefits through community engagement. This involves supporting local employment and economic development by integrating the local workforce as well as local materials and products into the construction project.
Good Practices
Owners and Contractors can consider the following good practices:
- Balance of local sourcing and expertise. The capabilities needed to implement the pre-defined climate resilience specifications within construction can be considered; it is important that those responsible for construction are well-trained and qualified to perform this work[11].
- Gender lens to community engagement. Gender-disaggregated data and balanced stakeholder representation can be used when involving community members in consultation in the construction phase and identifying community needs. The participation of all genders can be prioritised[11].
Process, Tools & Guidance
Map affected community groups and plan their engagement
Multi-modal network optimization & interdependenciesIdentify all groups directly and indirectly affected, including port workers, waterfront and fishing communities, and connecting-land-corridor residents. Also refer to the stakeholder map from action 5.2.1. Develop a stakeholder engagement plan covering the construction phase, formalising meeting frequency and format, languages, and how community inputs will be recorded and acted on[11].
Relevant tools and guidelines:
- Climate and Disaster Resilience: The Role for Community-Driven Development (Arnold et al., 2014) ֪ Chapter IV[50]
- Improving Socially Sustainable Design and Construction in Developing Countries (Pocock et al., 2014)[51]
- Assessing local building cultures for resilience & development: A practical guide for community-based assessment (Caimi et al., 2015)[52] – Chapters 2 and 3
Involve local SMEs in transport infrastructure construction
Work with local SMEs to unlock multiplier effects on economic benefits in the local community, without creating new vulnerabilities. (see action 7.2.2) Check whether their capabilities match what the resilience specifications require. Where gaps exist, decide how to close them, such as targeted training, mentoring, or pairing local firms with more experienced contractors, or where they cannot be closed in time, combine local involvement with specialist expertise brought in from elsewhere, so that resilience is not compromised for the sake of local sourcing.
Relevant tools and guidelines:
- Building Capacity to Manage Risks and Enhance Resilience: A Guidebook for Ports (UNCTAD, 2022)[53]
References
1. CDRI, 2023. Global Infrastructure Resilience - Capturing the Resilience Dividend. Available at: https://www.undp.org/india/publications/global-infrastructure-resilience-capturing-resilience-dividend
2. IADB, 2024. Resilient PPPs: A regional and multi-sectoral toolkit from Preparation to Sustainable Project Financing. Available at: https://publications.iadb.org/publications/english/document/Resilient-Public-Private-Partnerships-a-regional-and-multi-sectoral-toolkit-from-preparation-to-sustainable-project-financing.pdf
3. Schuldt et al., 2021. Weather-Related Construction Delays in a Changing Climate. Available at: https://doi.org/10.3390/su13052861
4. ILO, 2019. Working on a warmer planet: The impact of heat stress on labour productivity and decent work. Available at: https://www.ilo.org/sites/default/files/wcmsp5/groups/public/%40dgreports/%40dcomm/%40publ/documents/publication/wcms_711919.pdf
5. UNCTAD, 2020. Climate Change Impacts and Adaptation for Coastal Transport Infrastructure. Available at: https://sidsport-climateadapt.unctad.org/wp-content/uploads/2020/04/Compilation-of-practices-climate-change-impacts-and-adaptation-for-coastal-transport-infrastructure.pdf
6. UNEP, 2021. A Practical Guide to Climate-Resilient Buildings & Communities. Available at: https://wedocs.unep.org/items/95129d7b-63a5-4246-b20c-c26a3fbfecb7
7. European Commission, 2021. Technical guidance on the climate proofing of infrastructure in the period 2021-2027. Available at: https://ec.europa.eu/newsroom/cipr/items/722278/en
8. International Coalition for Sustainable Infrastructure, 2025. R4P Port Decision Makers' Guide to Climate Risk Assessment. Available at: https://sustainability-coalition.org/wp-content/uploads/2025/11/R4P-Port-Decision-Makers-Guide_FINAL.pdf
9. Schuldt et al., 2021. Weather-Related Construction Delays in a Changing Climate: A Systemic State-of-the-Art Review. Available at: https://doi.org/10.3390/su13052861
10. GFDRR. Building Regulation for Resilience. Available at: https://www.gfdrr.org/en/building-regulation-for-resilience
11. Global Centre on Adaptation, 2025. Climate-Resilient Infrastructure Handbook. Available at: https://gca.org/wp-content/uploads/2025/06/Climate-Resilient-Infrastructure-Handbook_20250613.pdf
12. BSI, ISO 19650. Available at: https://www.bsigroup.com/en-GB/products-and-services/standards/iso-19650-building-information-modelling-bim/
13. Song et al., 2009. Early Contractor Involvement research. Available at: https://trid.trb.org/View/878724
14. Hanna et al., 2012. Request for Information: Benchmarks and Metrics for Major Highway Projects. Available at: https://trid.trb.org/View/1225923
15. BSI Group. ISO 19650 - Managing information over the whole life cycle of a built asset using BIM. Available at: https://www.bsigroup.com/en-GB/iso-19650-BIM/
16. World Bank, 2020. Adaptation Principles: A Guide for Designing Strategies for Climate Change Adaptation and Resilience. Available at: https://openknowledge.worldbank.org/entities/publication/2dc19238-096a-5907-89c2-d4b99e6cb4d3
17. UNEP, 2021. A Practical Guide to Climate-Resilient Buildings & Communities. Available at: https://www.unep.org/resources/practical-guide-climate-resilient-buildings
18. European Commission: Technical Guidance on the Climate Proofing of Infrastructure in the period 2021-2027. Available at: https://ec.europa.eu/newsroom/cipr/items/722278/en
19. Schultz et al., 2021. Weather-Related Construction Delays in a Changing Climate: A Systematic State-of-the-Art Review. Available at: https://www.researchgate.net/publication/349893899_Weather-Related_Construction_Delays_in_a_Changing_Climate_A_Systematic_State-of-the-Art_Review
20. PAS, 2025. Plan to Accelerate Implementation of Resilient and Adaptive Transport Infrastructure. Available at: https://climateaction.unfccc.int/assets/documents/119_.pdf
21. McKinsey. Modular Construction: From projects to products. Available at: https://www.mckinsey.com/capabilities/operations/our-insights/modular-construction-from-projects-to-products
22. Modular Building Institute - webpage. Available at: https://www.modular.org/
23. Autodesk University. Introduction to prefabrication. Available at: https://www.autodesk.com/autodesk-university/class/Prefabrication-and-Modular-Construction-2013
24. Laing O'Rourke. Inside the Centre of Excellence for Modern Construction - video. Available at: https://www.youtube.com/watch?v=CvBUAL8uRDI&t=5s
25. Rose et al., 2021. Developing disaster risk reduction skills among informal construction workers in Nepal. Available at: https://onlinelibrary.wiley.com/doi/full/10.1111/disa.12435
26. UNCTAD, 2022. Building Capacity to manage Risks and Enhance Resilience: A Guidebook for Ports. Available at: https://unctad.org/system/files/official-document/tcsdtlinf2022d3_en.pdf
27. Moohialdin et al., 2019. Construction worker productivity in hot and humid weather conditions: A review of measurement methods at task, crew and project levels. Available at: https://www.researchgate.net/publication/333679634_Construction_worker_productivity_in_hot_and_humid_weather_conditions_A_review_of_measurement_methods_at_task_crew_and_project_levels
28. Orlov et al., 2020. Economic costs of heat-induced reductions in worker productivity due to global warming. Available at: https://www.sciencedirect.com/science/article/abs/pii/S0959378019311306?via%3Dihub
29. Met Office. Weather Services for Building Project Managers. Available at: https://www.metoffice.gov.uk/binaries/content/assets/metofficegovuk/pdf/business/sectors/construction-catalogue-guide-v2.pdf
30. GCA, 2025. Adaptation Insights – Climate Risks to African Ports: A Trade Corridor Approach for Resilience and Adaptation. Available at: https://gca.org/reports/adaptation-insights-ports-climate-risks-to-african-ports-a-trade-corridor-approach-for-resilience-and-adaptation/
31. Transport System Resilience Taskforce, 2025. Building transport resilience through partnership. Available at: https://uic.org/com/enews/article/we-rely-on-each-other-building-transport-resilience-through-partnership
32. ISO 22301. Business Continuity Management Systems. Available at: https://www.iso.org/standard/75106.html
33. IDB, 2020. Climate Resilient Public Private Partnerships: A Toolkit for Decision Makers. Available at https://publications.iadb.org/en/climate-resilient-public-private-partnerships-a-toolkit-for-decision-makers
34. Juliastuti et al., 2023. Risk Mitigation on Infrastructure Port Project Construction (Case Study: Sanur Port Project, Bali, Indonesia). Available at: https://www.e3s-conferences.org/articles/e3sconf/pdf/2023/25/e3sconf_icobar2023_01006.pdf
35. UNECE, 2025. Draft Guidelines on climate resilient PPPs. Available at: https://unece.org/sites/default/files/2026-04/UNECE%20Draft%20Guidelines%20on%20promoting%20climate%20resilient%20PPPs%20and%20infrastructure%20projects%20in%20support%20of%20the%20SDGs.pdf
36. European Commission, 2024. EU Construction and Demolition Waste Management Protocol 2024 (updated). Available at: https://build-up.ec.europa.eu/en/resources-and-tools/publications/eu-construction-demolition-waste-management-protocol-2024-updated
37. TT Club, Haskoning, ICHCA, 2025. Climate-ready Supply Chain (worked example of climate risk assessment process for port operators, Section 4). Available at: https://www.ttclub.com/fileadmin/uploads/tt-club/Documents/Climate-ready_supply_chain_document/TT_Club_Climate-ready_Supply_Chain_whitepaper_DIGITAL.pdf
38. Deloitte, 2020. Africa Construction Trends Report. Available at: https://www.deloitte.com/za/en/Industries/energy/analysis/africa-construction-trends-2020.html
39. UNEP, 2022. Good Practice Principles for Sustainable Infrastructure, 2nd Edition. Available at: https://unemg.org/wp-content/uploads/2021/09/EMGSOM.27_INF_4_Good-Practice-Principles_Sustainable-Infrastructure_Draft2ndEdition.pdf
40. OECD, 2018. The Mitigation of Risk in Resilient Supply Chains. Available at: https://www.oecd.org/en/publications/the-mitigation-of-risk-in-resilient-supply-chains_db34fa22-en.html
41. Ellen MacArthur Foundation, 2021. Completing the Picture: How the Circular Economy Tackles Climate Change. Available at https://content.ellenmacarthurfoundation.org/m/3eac8667edd240cc/original/Completing-the-picture-How-the-circular-economy-tackles-climate-change.pdf
42. World Bank, 2015. Building Regulation for Resilience. Available at: https://documents1.worldbank.org/curated/en/326581468337788007/pdf/ACS15966-WP-PUBLIC-BRR-report-002.pdf
43. BCG & CDRI, 2024. India Transport Infrastructure Reimagined: Forging Resilient Connections. Available at: https://www.bcg.com/publications/2024/india-transport-infrastructure-reimagined-forging-resilient-connections
44. Canadian Construction Association, 2021. Strength, resilience, sustainability. Available at: https://www.cca-acc.com/wp-content/uploads/2021/03/Strength-resilience-sustainability-Full-Report-Final.pdf
45. Global Alliance for Buildings and Construction, 2026. The Global Status Report for Buildings and Construction. Available at: https://globalabc.org/global-status-report
46. GFDRR. Building Regulatory Capacity Assessment. Available at: https://www.gfdrr.org/en/building-regulation-for-resilience
47. GDRDD. Building Code Checklist. Available at: https://www.gfdrr.org/en/building-regulation-for-resilience
48. Canadian Construction Association, 2021. Calls for greater investment in sustainable infrastructure. Available at: https://www.cca-acc.com/canadian-construction-association-calls-for-greater-investment-in-sustainable-infrastructure-to-build-canadas-clean-economy
49. UNDP / BMTPC, 2016. Disaster Risk Reduction: A Handbook for Urban Managers. Available at: https://bmtpc.org/DataFiles/CMS/file/Publication/DRR_Handbook_Urban_Managers_2016.pdf
50. Arnold et al., 2014. Climate and Disaster Resilience: The Role for Community-Driven Development. Available at: https://www.gfdrr.org/sites/default/files/publication/850070WP0CDD0C0Box382145B000PUBLIC0.pdf
51. Pocock et al., 2014. Improving Socially Sustainable Design and Construction in Developing Countries. Available at: https://www.sciencedirect.com/science/article/pii/S1877705816300819
52. Caimi et al., 2015. Assessing local building cultures for resilience & development: A practical guide for community-based assessment. Available at: https://hal.archives-ouvertes.fr/hal-01493386/file/16059_Caimi_Assessing_local_building.pdf
53. UNCTAD, 2022. Building Capacity to Manage Risks and Enhance Resilience: A Guidebook for Ports. Available at: https://unctad.org/publication/building-capacity-manage-risks-and-enhance-resilience-guidebook-ports